Anson Engine Museum

Anson Engine Museum Gallery

Home > Company Histories > Mirrlees Blackstone Company

Mirrlees Blackstone Company
1.jpg
 1897 air blast injection single cylinder diesel engine according to Diesel's design.4785 viewsThe first diesel built in Britain
2.jpg
 3360 viewsAround the year 1903, the Admiralty ordered two engines, each of 160 BHP at 400 r.p.m. for installation in the battleship HMS Dreadnought.
3.jpg
 3162 viewsDuring 1906, the Admiralty specification required lightweight diesel engines for the propulsion of pinnaces and Mirrlees designed a four cylinder unit of 120 BHP at 400 r.p.m. These engines had bed plates of aluminium and columns of manganese bronze. The piston diameter was 9 and three quarter inches with a stroke of 12 inches.
4.jpg
 Broken Hill power station in Australia.4038 viewsMirrlees next designed a larger engine during the latter part of 1912, which in it's production form was a cross head type unit having a bore of 21.5 inches and a stroke of 24 inches giving 166 BHP per cylinder at 215 r.p.m.
5.jpg
 3847 viewsIn 1926 attention was paid to the development of other enclosed types, incorporating forced lubrication and two models were designed, one having a bore of 12.5 inches and a stroke of 19 inches, developing 60 BHP per cylinder at 300 r.p.m. and the other having a bore of 13 and three quarter inches and a stroke of 19 inches, developing 75 BHP per cylinder at 375 r.p.m.

6.jpg
 3523 viewsMirrlees designed 'Ricardo' sleeve valve engines, one type having a bore of 5.5 inches and a stroke of 6.5 inches, developing 20 BHP per cylinder at 900 r.p.m., and the other with a bore of 17 inches and stroke of 21.5 inches, developing 50 BHP per cylinder at 200 r.p.m.

7.jpg
 4136 views'HP', having a bore of 13.75 inches and stroke 21 inches was also developed during this period., made in five to eight cylinders in-line sizes, either normally aspirated or turbocharged.
8.jpg
 3581 views1934 Mirrlees designed a new engine, having a bore of 8.25 inches and a stroke of 12 inches developing 60 BHP per cylinder at 900 r.p.m. Example is a UD8
9.jpg
 3849 views'J' engine with a bore of 9.75 by 10.5 stroke, was made in 3,4,5,6 and 8 cylinders in-line and 8, 12 and 16 cylinders Vee form covering a range of 135 to 2,480 BHP at 600 to 1000 r.p.m.
     
9 files on 1 page(s)